Field Work • System Conditions • Real Fire Protection

See EXO Fire Protection in the Field.

From inspections and service work to corrective repairs, suppression systems, extinguishers, and code-related deficiencies, this gallery reflects the real conditions, equipment, and workmanship behind professional fire protection service.

Request Service View Services
A fire hydrant releasing a powerful stream of water onto a concrete surface outside a warehouse, with a clear blue sky and mountains in the background.
A fire sprinkler system pipe with control valves and pressure gauges, installed near a corner of a concrete floor and wall, with a ladder nearby.
Close-up of a brass sprinkler valve with a blue handle, installed outdoors on a pipe, surrounded by small gray and tan rocks.
Four stainless steel cylinders labeled ANSUL inside a metal industrial cabinet, with pipes and wires connected.
A red fire extinguisher labeled for Class D fires, used on combustible metals, with a hose attached, standing on a concrete floor in a workshop area.
A group of red fire extinguishers arranged on the floor in front of a garage door.
Electrical equipment and panels mounted on a wall inside a building.
A red fire alarm pull station mounted on a wooden wall with gold and green trim. The station has a label that says 'FIRE' and instructions to push in and pull down.
Fire alarm with blue strobe light on a textured ceiling
A plumbing valve assembly with brass and black pipes, a red handle, and a black elbow joint, mounted on a large dark pipe, with an unfinished wall background.
Fire protection system with red fire pump and black pipes in an industrial room.
A fire sprinkler testing bag attached to a pipe with insulation and concrete wall background.
Gallery Section

Internal Inspections

These photos highlight the conditions technicians encounter inside riser rooms, above-ceiling spaces, mechanical rooms, and protected areas where system performance, accessibility, labeling, and overall readiness matter. Internal inspections are where hidden issues are found before they become real compliance or reliability problems.

Riser Rooms Control Valves Above-Ceiling Conditions Device Access System Readiness
A black helmet placed inside a metallic sanding or polishing machine, with a metal shield or cover behind it.
Close-up of the interior of a large red pipe or cylinder, showing dark, hollow inside with some reflections and minor debris, possibly part of industrial equipment or machinery.
Close-up of the inside of a blackened, rusty metal container or pipe with some residue or debris along the inner edge.
Close-up of a black bicycle helmet inside a locker or storage space, with the helmet resting on a perforated surface.
Inside view of a rusty orange metal pipe or cylinder with water at the bottom.
Close-up of a black safety helmet inside an orange container, with a yellow protective shield behind.
Close-up of a mechanical part's inner surface, showing wear and some metal corrosion.
Close-up of a rusty, greasy metal pipe or cylinder tube.
A speaker mounted inside a wooden box, with a metal grille covering the cone, placed on an orange surface in a workshop setting.
Close-up of an empty orange paint can with some dried paint drips inside.
Close-up of a metal mechanical component with springs and pins inside a cylindrical container.
Inside view of an oil filter housing with a spring and metal components, showing the filter element.
Close-up view of the inside of a metallic pipe or cylindrical mechanical component showing parts like screws and mechanical fittings.
Close-up of a person's hand holding a metallic cylindrical object, possibly a mechanical part or tool, with a reflective interior surface.
The interior of a dirty, greasy metal pipe with black soot and grime coating the inside surface.
Close-up view of the inside of a black, empty metal pipe or tube with a corroded and textured surface.
Close-up view of the inside of a rusty, greasy metal pipe or cylinder with visible residue and corrosion.
Close-up of a mechanical assembly with a gold-colored spring, a gold lever, and black components inside a black and yellow housing.
Close-up of a worn, metallic internal part of a mechanical device or engine, showing a central bearing, a pivot point, and a spring at the bottom.
Close-up of the inside of a vintage typewriter showing the typebar mechanism with a coiled spring and metal parts.
Interior of a large metal pipe with rust and residue inside.
Close-up of an orange, rusty mechanical part, possibly a pump or motor housing, with a large central cylindrical opening.
Close-up of the inside of a metal cylinder, possibly part of an engine or machinery, with stamped numbers and markings on the bottom surface.
Close-up of the inside of a metal pipe or cylinder, showing a tense coil spring and a pin or rod, with some dirt or grime at the bottom.
Inside of a rusty, cylindrical metal grinder, showing signs of wear and leftover coffee grounds, mounted on a tiled countertop.
Looking inside an industrial or mechanical component, showing a metallic interior with a circular opening, bolts, a metal arm or pipe at the top, and an orange base at the bottom.
Top view of a mechanical device with a large spring, yellow screws, and metallic components inside a circular housing.
Close-up view of an empty, dirty metal pipe with some water and rust inside, looking toward the other end.
Rusty circular metal component with a silver central part, resting on a concrete floor with a white cloth nearby.
View of an engine cylinder head with the valve cover removed, showing the valves and internal parts, some rust and oil present.
Top view of a rusty, greasy metal pipe or cylindrical component, showing signs of corrosion and debris inside.
Close-up of a rusty, dirty engine cylinder bore with carbon deposits and oil residue.
Close-up of the inside of a rusty, corroded pipe with water and rust residue.
Top view of a rusty, corroded metal pipe with water inside.
View of inside a mechanical or industrial component, showing a needle valve or similar device with a spring and a hex bolt.
View from the top inside of a rocket or missile engine with metal components and wiring
Gallery Section

Fire Alarm & Detection

From control panels and initiating devices to notification appliances, batteries, monitoring interfaces, and field testing, these images show the equipment and details involved in proper alarm inspection, troubleshooting, and system verification.

Control Panels Smoke Detection Pull Stations Monitoring Interfaces Testing & Verification
Close-up of an electronic circuit board with various components and wires connected to a red device labeled 'L26036'.
Electrical panels and a fire alarm control panel on a beige wall inside a building.
Red fire alarm control panel with a digital display showing '007 CONVENTIONAL FIRE ZONE' and keypad buttons.
Ceiling with exposed pipes, a red alarm, and a partially visible step ladder.
A Power-Rite 12-volt, 12 amp-hour, 20-hour lead-acid battery with a black casing, labels indicating model and specifications, and various safety symbols. The label shows it was manufactured in December 2018 and includes instructions for use and recyc
Close-up of the back of a smoke detector, showing electrical connectors and mounting screws.
Electrical control panel with indicator lights, labeled switches, and notes related to building or system operations.
A sealed, rechargeable 12-volt lead-acid battery labeled POWERSONIC MODEL PS-1250 F1, with specifications and safety warnings on the front.
Close-up of a green printed circuit board with various electronic components and wires connected to a terminal block, inside an electronic device or machine.
Open fire alarm control panel with wires inside
Fire alarm control panel with a note attached below it. The display reads 'DISARMED READY TO ARM'. The note lists several items, including smoke in different floors, upstairs pull station, main floor pull station, and water flow tamper.
An electronic circuit board with multiple colorful wires connected to it and resistors mounted on the board.
A Duracell Ultra 12V 18Ah sealed lead-acid battery with wires and electrical components nearby.
Honeywell smoke detector from the Farenhyt series, model IDP-FIRE-CO, showing labels with technical specifications in black text on a white background.
A round smoke detector with a blue light on a textured ceiling.
Interior of an alarm system box with batteries, circuit boards, wires, and a control panel with a display and keypad.
Close-up of an electronic circuit board inside a device, showing various wires, relays, resistors, capacitors, and heatsinks.
Electrical panel with circuit board, wiring, and a large battery, mounted on a wall with a fire alarm box below.
Ceiling with smoke detector, fire alarm, vent, and exit sign
Ceiling with smoke detector, light fixture, fire alarm, and ceiling access panel.
Internal components of a building fire alarm control panel, including circuit boards, wiring, and battery backups.
Open fire alarm control panel with wiring and indicator lights, including an alarm, trouble, and A.C. status lights inside a red metal box.
A red fire alarm control panel with indicator lights and buttons installed inside a dark wall cabinet.
Fire alarm on a textured ceiling with grid ceiling tiles.
Open fire alarm control panel with circuit board, batteries, and wiring inside, mounted on a wall.
An open fire alarm control panel with various labeled buttons, wires, circuit boards, and batteries inside.
Interior view of a fire alarm control panel with various wiring and electronic components, including a sealed rechargeable battery and power supply module.
Interior view of a red fire alarm control box with its cover open, revealing a green circuit board, black battery, and various wiring.
Red Honeywell fire alarm control panel with a small digital display, located on a white wall, with labels for alarm, supervisor, trouble, silenced, and power.
Electrical control panel with a black circuit breaker, a digital timer switch, and two batteries labeled with yellow stickers '3/23' and '3/24'.
Open red metal box containing telecommunication and security system components, including circuit boards, a black battery, wiring, and a diagram on the inside of the lid.
View of a black interstate batteries fire and security backup power supply with wires connected inside a metal enclosure. There is also a circuit board and a white control panel with buttons above.
Inside of a mechanical control panel with circuit boards, wires, and batteries.
Close-up of a beige brick building wall with a small red vent near the center and white siding at the top, with an overcast sky above.
An old beige intercom or security alarm system mounted on a wall with a vent and buttons for various functions.
An electrical control panel attached to a wooden wall, with multiple wires, circuit boards, and a PEAK alarm sticker.
Gallery Section

Suppression Systems

Special hazard and suppression systems require close attention to component condition, discharge hardware, controls, shutdown functions, and protected hazard changes. These photos reflect the specialized equipment and field conditions that demand precise service and documentation.

Special Hazard Systems Clean Agent Equipment Kitchen Suppression Release Components Critical Protection Areas
Close-up of a dusty pneumatic actuator with a pressure gauge showing pressure level, mounted on a large industrial tank in a factory setting.
A dusty industrial pneumatic actuator with a pressure gauge and a caution label, mounted on a large tank or pipe in a mechanical room.
A person holding a small metal cylinder with printed technical information, including part number, weight, and manufacturing details, in a stainless steel kitchen environment.
Inside a metal electrical box showing wires, a relay, a sensor, and a spring, with some dirt and corrosion at the bottom.
Hand holding a pressure gauge with a green zone between 2000 and 3000 psi, indicating pressure in pounds per square inch, with text on the gauge reading "USE NO OIL" and "MADE IN U.S.A." in a kitchen setting.
Industrial facility with large metal tanks and extensive piping system, viewed from above.
Close-up view of a fire extinguisher attached to a red metal shelf, with the nozzle pointing downward. The nozzle is metallic with a red protective cap, and there is dusty dirt on the surface of the extinguisher.
Close-up view of a mechanical device inside a metallic enclosure, including a large cylindrical silver component, various metal brackets, wires, and colorful wiring with warning labels.
Four stainless steel cylinders labeled 'ANSUL' are mounted in a metal frame, with various pipes and wiring connected to them, inside an industrial setting.
Industrial workspace with fire extinguishers, metal panels, and ventilation equipment in a warehouse or factory setting.
Interior of a small electrical or mechanical device with wires, a copper pipe, a red coil spring, and metal components mounted inside a white box.
Close-up of a fire sprinkler head attached to a red fire suppression system tank, with metal pipes and fittings.
Close-up of mechanical components inside an old machine, including gears, a red handle, wires, and various metal parts.
Close-up of machinery with metal, black hoses, and orange knob handles, possibly part of a hydraulic or fuel system.
Inside a metal enclosure with electrical components, wires, a red cylinder, and a warning label, likely part of a fire suppression system.
Industrial kitchen with stainless steel surfaces, large commercial refrigerators, and cleaning supplies visible on the side.
A red Kitchen Knight II fire suppression system cylinder labeled PCI-300, installed in a kitchen or similar setting.
Looking into a large industrial or mechanical pipe with a metal support structure inside.
Commercial kitchen with stainless steel appliances, including fryers, stove, and preparation tables.
Red control head labeled 'Model NMCH3 Control Head' with wires and metal piping, mounted inside a stainless steel enclosure.
Gallery Section

Portable Fire Extinguishers

This section captures extinguisher condition, placement, tagging, cabinet installations, servicing, and inventory observations. Proper extinguisher service is about more than tags alone. Type, access, visibility, mounting, pressure, and overall readiness all matter.

Annual Maintenance Placement & Access Tagging & Identification Cabinets & Mounting Service Conditions
A red fire extinguisher with a pressure gauge and instructions attached, placed on a concrete floor in a workshop or garage.
A group of fire extinguishers arranged on a concrete floor in front of a grey garage door.
A fire extinguisher placed on a vehicle dashboard with a pressure gauge on top, surrounded by papers and an orange and black object, with a outside view of a house and trees through the windshield.
Various fire extinguishers arranged outside a building near a garage door, with some placed on the ground and others on a small shelf.
Red fire extinguisher with black hose attached, placed on the floor next to a white bucket in a workshop or garage setting.
Gallery Section

Deficiencies & Field Conditions

These images document the kinds of issues that affect compliance, reliability, serviceability, and life-safety performance. Damage, corrosion, missing components, impaired devices, accessibility problems, and other observable deficiencies are often the difference between a system that appears acceptable and one that actually performs when needed.

Corrosion Damage Missing Components Impairments Code Concerns
Ceiling with textured finish and an empty electrical or light fixture socket.
Cardboard boxes labeled "10x Bed Pads" stacked on a metal shelf in a room with a textured ceiling and a missing light fixture.
Ceiling with a fluorescent light and exposed piping.
Ceiling with a smoke detector, a recessed light fixture, and an air vent.
Ceiling of an indoor space with fluorescent light panels and white pipes, with a view of an open garage door and windows showing cars outside.
Ceiling with fluorescent light fixture, stacked cardboard boxes on a shelf, and part of a metal shelving unit.
Ceiling with a hole and a recessed light fixture, the fixture is missing the bulb or cover.
Ceiling with a hole where a light fixture is missing, showing wiring and fixture inside the hole.
A ceiling with old, rusted steel beams, some white pipes, and a brown painted metal pipe with a valve, seen from below.
Ceiling with a hole and exposed wires.
Ceiling with an empty light fixture socket and a white air vent at the bottom.
Ceiling with metal ductwork and a light fixture socket without a bulb.
Ceiling with chipped paint, a black wire hanging, and a metal pipe.
Ceiling with black pipe, metal clamp, copper pipes, and a suspended pipe support system.
Ceiling with an exposed electrical or fire sprinkler pipe hole and a panel door.
View of plumbing pipes, including a brown pipe and white pipe, running along a corner of a room under construction with exposed ceiling beams and an electrical box.

Need service, repairs, or inspection support?

Whether you are addressing deficiencies, scheduling recurring service, or dealing with an urgent fire protection issue, EXO Fire Protection provides professional support across inspection, testing, maintenance, repair, and system-specific service needs.

Contact EXO Fire Protection Explore Our Services